Fog Removal Equipment Market: Introduction
FOG stands for Fat, Oil & Grease, which are the by-products of food, chemical, pharmaceutical and various other industrial processing systems. FOG removal is important to prevent sewage blockages, which can further result in environmental pollution. FOG (Fat, Oil & Grease) removal equipment is used as a primary wastewater treating mechanism wherein the wastewater from kitchens or material processing industries, where fats, oils & greases are unwanted by-products, is treated before letting the wastewater out to sewage. The mechanism works on the principle of buoyancy and relative coefficients of expansion of water and oil.
Typical FOG (Fat, Oil & Grease) removal equipment consists of a tank with 2 or more separations, inlet, outlet and two way access from the top. The wastewater is made to flow through the inlet into the FOG (Fat, Oil & Grease) removal equipment’s tank after going through some heat treatment. The FOG elements in the heated wastewater liquefy and float over the stream. When the wastewater enters the tank, the solid particles settle to the floor and FOG are separated from the water in alternate compartments. The water thus obtained is drained out from the outlet. FOG (Fat, Oil & Grease) removal equipment are available in various sizes and construction formats.
To remain ‘ahead’ of your competitors, request for a sample @
https://www.persistencemarketresearch.com/samples/22159
They range from 5 Litres to more than 30,000 Litres and can be made of metal, plastic or cement as per the requirement. FOG interceptors are essential to regulate the clogging of sewage systems. Non-removal of FOG from wastewater might result in costly maintenance of sewage pipelines and hefty fees from county and landfill management units. Therefore, FOG pre-treatment is a necessary affair for any restaurant, hospital, cosmetic factory or any unit that uses animal & vegetable fats for processing purposes.
A good number of FOG (Fat, Oil & Grease) removal equipment are available in the market at competitive prices. However, as the equipment requires regular maintenance, a need for improvisation in this regard can facilitate higher sales numbers by promising better results with lower maintenance expenditures.
Fog Removal Equipment Market: Drivers & Challenges
FOG (Fat, Oil & Grease) removal equipment finds widespread use in hotels, hospitals and cosmetic and pharmaceutical industries where fat, oil & grease are inevitable wastes produced along with the main products. With growing environmental concerns and strict regulations from government authorities, it is mandatory for every industry to pre-treat wastewater before releasing into sewage. This has assisted the growth of the FOG (Fat, Oil & Grease) removal equipment market and can be considered as the key market driver.
The growing demand for food processing and cosmetics industries has fuelled the FOG interceptors market and many environmental agencies have come up with awards and recognitions for best sewage treatments, which has encouraged business owners to implement the technology in their hotels or plants. This has been seen as a new trend in the market for FOG (Fat, Oil & Grease) removal equipment. Overall, the market seems to be favourable due to various food processing, chemical and cosmetic industries coming up in various parts of the world. With the growing demand for pharmaceuticals and paints, the scope for the FOG (Fat, Oil & Grease) removal equipment market is expected to constantly expand in the coming years.
The only restraint seen in this market is its high initial and operating costs. The system uses electricity and requires qualified professionals to clean the tank at least once a week. This is a hindrance; however, since the system is a mandate with any animal and vegetable processing industry, this is not expected to affect the market. In fact, this hindrance can prove to be an opportunity for existing and new players in the market to come up with a system that doesn’t call for regular maintenance.
For critical insights on this market, request for methodology here @
https://www.persistencemarketresearch.com/methodology/22159
Fog Removal Equipment Market: Segmentation
| basis of the construction |
|
| basis of the tank volume |
|
| basis of the operation |
|
| end user |
|
Fog Removal Equipment Market: Regional Outlook
The market for FOG (Fat, Oil & Grease) removal equipment is booming in most developed regions, such as the U.S., Canada, Europe and Japan. The market is picking up in the APEJ region and is expected to grow strategically in the coming years. The market in MEA and LA regions have a similar scenario.
These regions are seeing the most development and there is significant scope for FOG (Fat, Oil & Grease) removal equipment in these regions. Developed regions, however, already have an established market for the same, which are further projected to surge over the forecast period.
For in-depth competitive analysis, buy now@
https://www.persistencemarketresearch.com/checkout/22159
Fog Removal Equipment Market: Key Players
Examples of some of the market participants identified in the FOG (Fat, Oil & Grease) removal equipment market are:
- Yokogawa Electric Corporation
- Daiki Axis Co. Ltd.
- Environmental Equipment Co.
- Aqua Mundus Ltd
- FogBusters, Inc.
- Astim Endüstri Tesisleri ?malat Montaj Taahhüt A.?.
- Fluence Corporation Limited
- Bio-Microbics, Inc.
- Cleveland Biotech Limited
- Process Wastewater Technologies LLC
The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to market segments such as geographies, application, and industry.
Explore PMR’s Extensive Coverage on Industrial Automation Domain –
Limit Switch Market – Market Study on Limit Switches: Market Expanding on Back of Growing Industrial Sector Along with Rising Automation
Water and Wastewater Pipes Market – Market Study on Water and Wastewater Pipes: High Demand to Be Witnessed for Plastic Variants
Thermostatic Mixing Valves Market – Market Study on Thermostatic Mixing Valves: Rapid Rise in Demand to Be Seen from Residential Sector
About us:
Persistence Market Research is here to provide companies a one-stop solution with regards to bettering customer experience. It does engage in gathering appropriate feedback after getting through personalized customer interactions for adding value to customers’ experience by acting as the “missing” link between “customer relationships” and “business outcomes’. The best possible returns are assured therein.
Contact us:
Persistence Market Research
Address – 305 Broadway, 7th Floor, New York City,
NY 10007 United States
U.S. Ph. – +1-646-568-7751
USA-Canada Toll-free – +1 800-961-0353
Sales – [email protected]